Gigaset QuickSync Mac Release 3.0.2

Version 3.0.2:

• Rewritten sync engine to fully support iCloud contacts
• Added support for S820
• Clip Picture sync (SL910 & S820)
• Dialing will be done in handsfree mode
• General bug fixes 

Gigaset Quick Sync version 8.0 (64bit)

Please see below for details.

Gigaset Quick Sync version 8.0 (64bit)

Please see below for details.

Gigaset Quick Sync Version 8.0 (32bit)

QuickSync Software for Mac (version 2.1.1)

Added support for the following devices:

• SL910H incl. firmware update
• DE310
• DE410
• DE700
• DE900
• SL610 Pro

• Set the area and country codes in the QuickSync software and the Gigaset phone correctly. Wrong settings can lead to wrong synchronizations.
• Please backup your Mac address book contacts before the first sync. (See QuickSync help)

QuickSync Software for Mac (version 2.1)

Added support for the following devices:

• SL910H incl. firmware update
• DE310
• DE410
• DE700
• DE900
• SL610 Pro

• Set the area and country codes in the QuickSync software and the Gigaset phone correctly. Wrong settings can lead to wrong synchronizations.
• Please backup your Mac address book contacts before the first sync. (See QuickSync help)

Gigaset S810, S810H, S810A, S810A Duo, S810A Trio, SX 810 ISDN, SX 810A ISDN, S79H, S795 Duo - Firmware update 11/2011 (Version 78.053.01)

Improvements:

• As of this version, update also possible with a MAC PC
• Improvements for operation on multi-cell systems
• CLIP display is supported for incoming calls for Alcatel PBXs

How to update the handset Gigaset
S810, S810H, S810A, S810A Duo, S810A Trio, SX 810 ISDN, SX 810A ISDN, S79H, S795 Duo:

1. Please start the software "Gigaset QuickSync" on your PC. You will find it on the internet at http://gigaset.com/hq/en/cms/PageQuickSync.html
2. Please carry out the update of the Gigaset QuickSync software if it is offered.
3. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).
4. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.
5. Establish a connection to the handset with the Gigaset QuickSync.
6. If a new handset firmware is available, a prompt automatically appears.
7. The firmware will be installed on your handset in several cycles.
8. Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.

Gigaset QuickSync version 1.3.4 (Mac version)

Download version: 1.3.4 (Oktober 2011) ; For Mac OS X 10.4.9 and higher

With this software, you can easily synchronize your contacts on your Macintosh with your Gigaset handset via Bluetooth®.

New in Version 1.3.4:

• Small bug fixes for MacOS 10.4
• Last version with MacOS 10.4 support. If you are running MacOS 10.5 or higher, please check again for new version after updating

 
New in Version 1.3.3:

• Support for S800H/S810H
• Device names can now be changed, just establish the connection to the device and click on it's name

New in Version 1.3.2:

• Bugfix: Connection problem after device registration

Features:

• Synchronisation of Contacts
• Download of screensavers and Picture CLIPs
• Download of ringertones*

Gigaset SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP and S68H, DX600A ISDN, DX800A, DL500A

*Only with Gigaset SL785, SL780 and SL78H

Gigaset QuickSync version 7.2 (64bit)

The new Gigaset phones let you exchange your contact data both quickly and easily. Plus, you can sync your address book data. Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset phone.

Thanks to this convenient software, you can easily synchronize your addresses in Microsoft® Outlook®, (Windows® XP*), Windows® Contacts (Windows Vista or Windows 7®) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

For Microsoft® Windows® XP*, Windows® Vista (64bit) and Windows 7® (64bit).

Release date: March 2012

Features:

• NEW (only for SL910): Automatic picture transfer from outlook contacts into handset addressbook
  Caller pictures in Outlook contacts are automatically associated with the address book entry
  For Contacts in Outlook 2007 and 2010 (32 bit Version); up to 244 pictures synchronized
  Full resolution with caller pictures from Outlook 2010, previous versions provide limited resolutions.
• Download of ringer melodies, screen savers and caller’s pictures
• Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download
• Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
• Picture Editor: User can comfortably select, which part of the picture will be sent to handset
• Handset's firmware update**
• Fast synchronization between your PC address book and Gigaset
• Supports the following programs: Vista Contacts, Windows 7 Contacts, Windows® Address book, Outlook® 2003, 2007 and 2010 (32 bit version)
• Quickly recognizes your Gigaset phones
• Support of Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H
  
  • USB-Drivers (WHQL-certified) provided for USB-Interface
  • Synchronization of up to 500 Addressbook Entries
  • Automatic check for new Firmware-Versions (daily)
  • Firmware-Update (only via USB-connection)
• Support of DL500A, DX600A ISDN, DX800A all in one:
  • Synchronization of up to 1000 Addressbook Entries
  • local network connection
• Discovery wizard for serial/Bluetooth and Ethernet connection
• Support of multiple phones with user friendly names
• Synchronization with Outlook-Folders possible
• CTI-Functionality (Telephony-Modus):
  • Support of Windows Telephony Interface for e.g.
  • dialing directly from Outlook contacts
  • incoming calls are displayed on the PC
  • CTI via Bluetooth for SL910H, SL78H, SL400H, S800H, S810H via USB for S79H, via Ethernet for DL500A, DX600A ISDN, DX800 all in one, DE700, DE900, DE310 and DE410.
• Support of DE700 and DE900:
  • synchronization of additional contact`s phone numbers and fields like caller`s picuture or address
• Support of DE310 and DE410

• Support for Gigaset SL910, SL910A and SL910H
• Support for DE310 and DE410
• New Easy-to-Use Look and Feel of User Interface
• Firmware Update for handset SL910H
• Bluetooth connection setup integrated withQuickSync
• Autostart Gigaset QuickSync when Windows starts (option)
• Autostart Telephony Mode on Gigaset QuickSync startup (option)

Firmware update for Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H:

• connect your Gigaset via USB-cable
• internet connection required
• launch Gigaset QuickSync
• start firmware update (Settings -> Device properties -> Firmware Update)

Gigaset QuickSync is compatible with:
Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, SL400, SL400A, SL400H, SL610H PRO, S795, S790, S79H, SX790 ISDN, SX795 ISDN, S800H, S810H, DL500A, DX600A ISDN, DX800A all in one, DE700IP PRO, DE900IP PRO, DE310IP PRO, DE410IP PRO

 
* .Net Framework 2.0 or higher is necessary when using Gigaset QuickSync with Windows® XP
** Only with Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, S795, S790, S79H, S800H, S810H, SL400, SL400A, SL400H

Gigaset QuickSync version 7.2 (32bit)

The new Gigaset phones let you exchange your contact data both quickly and easily. Plus, you can sync your address book data. Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset phone.

Thanks to this convenient software, you can easily synchronize your addresses in Microsoft® Outlook®, (Windows® XP*), Windows® Contacts (Windows Vista or Windows 7®) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

For Microsoft® Windows® XP*, Windows® Vista (32bit) and Windows 7® (32bit).

Release date: March 2012

Features:

• NEW (only for SL910): Automatic picture transfer from outlook contacts into handset addressbook
  Caller pictures in Outlook contacts are automatically associated with the address book entry
  For Contacts in Outlook 2007 and 2010 (32 bit Version); up to 244 pictures synchronized
  Full resolution with caller pictures from Outlook 2010, previous versions provide limited resolutions.
• Download of ringer melodies, screen savers and caller’s pictures
• Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download
• Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
• Picture Editor: User can comfortably select, which part of the picture will be sent to handset
• Handset's firmware update**
• Fast synchronization between your PC address book and Gigaset
• Supports the following programs: Vista Contacts, Windows 7 Contacts, Windows® Address book, Outlook® 2003, 2007 and 2010 (32 bit version)
• Quickly recognizes your Gigaset phones
• Support of Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H
  
  • USB-Drivers (WHQL-certified) provided for USB-Interface
  • Synchronization of up to 500 Addressbook Entries
  • Automatic check for new Firmware-Versions (daily)
  • Firmware-Update (only via USB-connection)
• Support of DL500A, DX600A ISDN, DX800A all in one:
  • Synchronization of up to 1000 Addressbook Entries
  • local network connection
• Discovery wizard for serial/Bluetooth and Ethernet connection
• Support of multiple phones with user friendly names
• Synchronization with Outlook-Folders possible
• CTI-Functionality (Telephony-Modus):
  • Support of Windows Telephony Interface for e.g.
  • dialing directly from Outlook contacts
  • incoming calls are displayed on the PC
  • CTI via Bluetooth for SL910H, SL78H, SL400H, S800H, S810H via USB for S79H, via Ethernet for DL500A, DX600A ISDN, DX800 all in one, DE700, DE900, DE310 and DE410.
• Support of DE700 and DE900:
  • synchronization of additional contact`s phone numbers and fields like caller`s picuture or address
• Support of DE310 and DE410

• Support for Gigaset SL910, SL910A and SL910H
• Support for DE310 and DE410
• New Easy-to-Use Look and Feel of User Interface
• Firmware Update for handset SL910H
• Bluetooth connection setup integrated withQuickSync
• Autostart Gigaset QuickSync when Windows starts (option)
• Autostart Telephony Mode on Gigaset QuickSync startup (option)

Firmware update for Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H:

• connect your Gigaset via USB-cable
• internet connection required
• launch Gigaset QuickSync
• start firmware update (Settings -> Device properties -> Firmware Update)

Gigaset QuickSync is compatible with:
Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, SL400, SL400A, SL400H, SL610H PRO, S795, S790, S79H, SX790 ISDN, SX795 ISDN, S800H, S810H, DL500A, DX600A ISDN, DX800A all in one, DE700IP PRO, DE900IP PRO, DE310IP PRO, DE410IP PRO

 
* .Net Framework 2.0 or higher is necessary when using Gigaset QuickSync with Windows® XP
** Only with Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, S795, S790, S79H, S800H, S810H, SL400, SL400A, SL400H

Gigaset QuickSync version 7.1 (64bit)

The new Gigaset phones let you exchange your contact data both quickly and easily. Plus, you can sync your address book data. Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset phone.

Thanks to this convenient software, you can easily synchronize your addresses in Microsoft® Outlook®, (Windows® XP*), Windows® Contacts (Windows Vista or Windows 7®) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

For Microsoft® Windows® XP*, Windows® Vista (64bit) and Windows 7® (64bit).

Release date: November 2011

Features:

• Download of ringer melodies, screen savers and caller’s pictures
• Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download
• Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
• Picture Editor: User can comfortably select, which part of the picture will be sent to handset
• Handset's firmware update**
• Fast synchronization between your PC address book and Gigaset
• Supports the following programs: Vista Contacts, Windows 7 Contacts, Windows® Address book, Outlook® 2003, 2007 and 2010 (32 bit version)
• Quickly recognizes your Gigaset phones
• Support of Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H
  
  • USB-Drivers (WHQL-certified) provided for USB-Interface
  • Synchronization of up to 500 Addressbook Entries
  • Automatic check for new Firmware-Versions (daily)
  • Firmware-Update (only via USB-connection)
• Support of DL500A, DX600A ISDN, DX800A all in one:
  • Synchronization of up to 1000 Addressbook Entries
  • local network connection
• Discovery wizard for serial/Bluetooth and Ethernet connection
• Support of multiple phones with user friendly names
• Synchronization with Outlook-Folders possible
• CTI-Functionality (Telephony-Modus):
  • Support of Windows Telephony Interface for e.g.
  • dialing directly from Outlook contacts
  • incoming calls are displayed on the PC
  • CTI via Bluetooth for SL910H, SL78H, SL400H, S800H, S810H via USB for S79H, via Ethernet for DL500A, DX600A ISDN, DX800 all in one, DE700, DE900, DE310 and DE410.
• Support of DE700 and DE900:
  • synchronization of additional contact`s phone numbers and fields like caller`s picuture or address
• Support of DE310 and DE410

• Support for Gigaset SL910, SL910A and SL910H
• Support for DE310 and DE410
• New Easy-to-Use Look and Feel of User Interface
• Firmware Update for handset SL910H
• Bluetooth connection setup integrated withQuickSync
• Autostart Gigaset QuickSync when Windows starts (option)
• Autostart Telephony Mode on Gigaset QuickSync startup (option)

Firmware update for Gigaset SL910H, SL78H, S79H, S800H, S810H and SL400H:

• connect your Gigaset via USB-cable
• internet connection required
• launch Gigaset QuickSync
• start firmware update (Settings -> Device properties -> Firmware Update)

Gigaset QuickSync is compatible with:
Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, SL400, SL400A, SL400H, SL610H PRO, S795, S790, S79H, SX790 ISDN, SX795 ISDN, S800H, S810H, DL500A, DX600A ISDN, DX800A all in one, DE700IP PRO, DE900IP PRO, DE310IP PRO, DE410IP PRO

 
* .Net Framework 2.0 or higher is necessary when using Gigaset QuickSync with Windows® XP
** Only with Gigaset SL910, SL910A, SL910H, SL785, SL780, SL78H, S795, S790, S79H, S800H, S810H, SL400, SL400A, SL400H

Gigaset S79H - Firmware update 04/2011 (version 78.045.02)

How to update:

1. Please start the software "Gigaset Quicksync" on your PC. You will find it on the internet at http://gigaset.com/hq/en/cms/PageQuickSync.html
2. Please carry out the update of the Gigaset Quick Sync software if it is offered.
3. Remove the battery cover from your Gigaset S79H handset.
4. Connect the handset directly to your PC via a mini USB cable. (Do not connect the USB cable via a USB HUB to your PC; failures may occur).
5. Leave the batteries in the handset and switch the handset on. If necessary the device driver software of your handset will be installed automatically on your PC.
6. Choose “Connect handset automatically” in the Gigaset Quicksync window.
7. When a connection is set up, the message “S79H connected (n) (nnnnnnnnnn)” appears. If a new handset firmware is available, a prompt automatically appears.
8. The firmware will be installed on your handset in several cycles.
   Do not disconnect your handset until you see the message “Handset firmware has been updated successfully”.

Improvements and changes:

• Direct call
  By pressing any key  the one number already stored is dialled.
• Babyphone function with feedback:
  In addition to being able to hear the baby, it is now also possible to answer the baby.
• Displaying CLIP type (redial list):
  An icon in front of the number/name in the CLIP display shows where a call was started: home, office, mobile.
• Battery low tone in handset changed.
• IP –feature support:
  Live ticker text can be enabled / disabled locally on handset

Descriptions for Firmware update:

• Pictures and ringtones stored on the handset should also be stored on the PC; these are deleted during an emergency update!
• When updating SW do not connect the handset via the USB hub; please connect handset directly to the PC.

Gigaset QuickSync version 6.1

Download version: 6.1 (April 2011): For Microsoft® Windows® XP*, Windows® Vista (32bit and 64bit) and Windows 7®

Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset handset.

Thanks to this convenient software, you can easily synchronize your addresses in Microsoft® Outlook®, (Windows® XP*), Windows® Contacts (Windows Vista or Windows 7®) with your Gigaset phone via Bluetooth®, a data transfer cable or Ethernet network connection.

Features:

• Download of ringer melodies, screen savers and caller’s pictures 
• Pictures compressed (much better memory usage)
• Support all (not copyright protected) music formats on the PC - real sounds (e.g. MP3, AAC, …) with automatic conversion to phone's (G.722) format during download
  
• Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
• Picture Editor: User can comfortably select, which part of the picture will be sent to handset
• Handset's firmware update**
• Fast synchronization between your PC address book and Gigaset
• Supports the following programs: Vista Contacts, Windows 7 Contacts, Windows® Address book, Outlook® 2003, 2007 and 2010 (32 bit version)
• Quickly recognizes your Gigaset phones
• Support of Gigaset SL78H, S79H, S800H, S810H and SL400H
  
  • USB-Drivers (WHQL-certified) provided for USB-Interface
  • Synchronization of up to 500 Addressbook Entries
  • Automatic check for new Firmware-Versions (daily)
    
  • Firmware-Update (only via USB-connection)
• Support of DX600A ISDN:
  
  • Synchronization of up to 500 Addressbook Entries
  • local network connection
• Discovery wizard for serial/Bluetooth and Ethernet connection
• Support of multiple phones with user friendly names
• Synchronization with Outlook-Folders possible
• CTI-Functionality (Telephony-Modus):
  
  • Support of Windows Telephony Interface for e.g.
  • dialing directly from Outlook contacts
  • incoming calls are displayed on the PC
  • CTI via Bluetooth for SL78H, SL400H, S800H, S810H via USB for S79H, via Ethernet for DX600A ISDN
    
• Support of DE700 and DE900:
  • synchronization of additional contact`s phone numbers and fields like caller`s picture or address

New Functionality in PC-Software Gigaset QuickSync 6.1:

• Support for S800H and S810H phones
• Major advantages:
  • enhancement of connection stability (especially in Telephony Mode)
  • improvement of Picture and Ringtone Editors
  • correction for saving Area Code settings

Firmware update for Gigaset SL78H, S79H, S800H, S810H and SL400H:

• connect your Gigaset via USB-cable
• internet connection required
• launch Gigaset QuickSync
• start firmware update (Settings -> Device properties -> Firmware Update)

Gigaset QuickSync is compatible with:
Gigaset SL785, SL780, SL78H, SL400, SL400A, SL400H, SL375, SL370, SL37H, S795, S790, S79H, SX790 ISDN, SX795 ISDN, S800H, S810H, S685, S680, SX685 isdn, SX680 isdn, S685 IP, S68H, DL500A, DX600A ISDN, DX800A all in one, DE700, DE900

Gigaset QuickSync version 1.3.3 (Mac version)

Download version: 1.3.3 (April 2011) ; For Mac OS X 10.4.9 and higher
With this software, you can easily synchronize your contacts on your Macintosh with your Gigaset handset via Bluetooth®.

New in Version 1.3.3:

• Support for S800H/S810H
• Device names can now be changed, just establish the connection to the device and click on it's name
  

New in Version 1.3.2:

• Bugfix: Connection problem after device registration

Features:

• Synchronisation of Contacts
• Download of screensavers and Picture CLIPs
• Download of ringertones*

Gigaset SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S810, S810A, S810H, S800, S800A, S800H, S790, S795, S79H, SX790 ISDN, SX795 ISDN, S685, S680, SX685 isdn, SX680 isdn, S685 IP and S68H, DX600A ISDN, DX800A, DL500A

*Only with Gigaset SL785, SL780 and SL78H

Gigaset S79H- Mise à jour du logiciel du 05/2010 ( version 78.036.04)

Comment mettre à jour votre logiciel :

• Démarrer le logiciel Gigaset Quicksync sur votre PC. Vous le trouverez sur internet à l’adresse suivante : http://gigaset.com/hq/en/cms/PageQuickSync.html
• Effectuer la mise à jour du logiciel Gigaset Quick Sync lorsque l’on vous invite à le faire
• Retirer le cache-batterie du combiné de votre Gigaset S79H
• Connecter votre combiné directement sur votre PC via un mini câble USB (Ne connecter pas le câble USB via un port USB sur votre PC, cela risquerait de faire échouer le processus)
•  Laisser la batterie dans le combiné et allumer votre combiné. Si nécessaire, le logiciel de votre combiné sera automatiquement installé sur votre PC
• Choisir «  Connecter un combiné automatiquement » dans la fenêtre du logiciel Gigaset QuickSync
• Quand la connexion est établie, le message «  S79H connecté (n) (nnnnnnnnnn)” » apparaît. Si un nouveau combiné est disponible, une fenêtre s’ouvrira automatiquement
• Le logiciel sera installé sur votre combiné en plusieurs étapes
• Ne pas déconnecter votre combiné jusqu’à voir apparaître le message suivant : « Le combiné a été mis à jour avec succès »

Améliorations et changements

• Diaporama: Le menu économiseur d’écran est maintenant doté de la fonction Diaporama. Toutes les photos du fichier de l’économiseur d’écran défilent en mode aléatoire les unes après les autres
• Clavier rétro-éclairé: la luminosité de l’écran est réglable en 5 étapes.
• 4 profils mains-libres: le combiné a maintenant 4 profils mains-libres
  • Profil n°1: Standard
  • Profil n° 2: Où l’environnement sonore est perturbé (mode Half Duplex)
  • Profil n° 3: Full duplex (seulement sur une bonne ligne téléphonique)
  • Profil n°4: Optimisé pour des connexions spéciales.
  
  
  

Installer un profil mains-libres

Vous pouvez installer différents profils mains-libres pour adapter au mieux votre téléphone à votre environnement

• Profil  n°1: La configuration optimale pour la plupart des communications, installée par défaut.
• Profil n°2: Qualité optimale en mode mains-libres. Cependant, cela signifie que les participants ne peuvent pas parler en même temps  (mode Half Duplex)
• Profil n° 3: Optimise la conversation en mode Full Duplex, c’est-à-dire que les deux appelants peuvent s’entendre, même s’ils parlent en même temps
• Profil n°4: Si les paramètres par défaut ( profil n°1) ne restitue pas un son optimal, essayer le profil n°4

• Remarques supplémentaires concernant l’affichage: Si l’écran retro-éclairé est actif lorsque que le combiné n’est pas en charge, cela réduit considérablement son autonomie
• Annuler tous ses rendez-vous pour une journée donnée: Avec cette nouvelle option, le client pour annuler tous ses rendez-vous pour la journée.
• Affichage de statuts (exemples AM1 = on ; INT 16) optimisé

Descriptions de mise à jour du logiciel Firmware: 

• Les photos et les sonneries stockées sur le combiné doivent être stockées sur le PC car des données sont effacées lors des mises à jour d’urgence !
• Si la mise à jour du logiciel ne fonctionne pas via un port USB, connecter le combiné directement au PC

 Télécharger ces informations ici

Sauvergarde de sonneries et d'économiseurs d'écran sur le Gigaset S79H

Si vous avez besoin des sonneries et des économiseurs d'écran qui étaient stockés sur le combiné de votre Gigaset à l'achat, vous pouvez les télécharger grâce au logiciel Gigaset QuickSync.