Gigaset C470 IP / C475 IP / S675 IP / S685 IP - Firmware update 03/2010 (version 02223)
New features:
- Web Configurator (Settings/Telephony/Advanced Settings/Call Transfer): attended and unattended call transfer implemented.
- Web Configurator (Settings/Telephony/Audio): configurable codec list for Gigaset.net telephony implemented.
- Auto-configuration using the MAC address for retail variants implemented.
Improvements: - Instability issue generated during G.722 Codec negotiation, when a SIP "183 Session Progress" Message is received, is fixed.
- Negotiation
of speech codec after ending an external consultation call between a
wideband capable (G.722 codec) and a narrowband capable phone is
improved.
- Registration of more than 5 SIP accounts is possible again.
- "MWI key is permanently flashing" issue is fixed.
- MWI notification for incoming SMS via IP.*
- Improvement for Gigaset auto-configuration using TLS encryption.*/**
- PSTN:
Local Area Code will be added to the dialled number if the usage of
Area Codes is enabled in the appropriate dialling rule.
- Switzerland: Set [tel.search.ch] as default provider for the online directory.
- Russia: Improvements for calls with Russian Caller ID.
* provider-dependent
** device-dependent
How to update the firmware: You don't need to download files. The firmware is updated directly
online by the Gigaset C470 IP / C475 IP / S675 IP / S685 IP. You can easily initiate the
update by three steps:
1. Menu
» Settings
» Base
» Firmware Update
2. Enter base station system PIN (default setting: 0000)
3. Press the display key "Yes" to start the download If your firmware is already up to date, the handset informs you. No action is needed then.
How to check for your firmware version: - Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
- If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update
Download
Gigaset QuickSync version 5.1
Download version: 5.1 (April 2010); For Microsoft® Windows® XP*, Windows® Vista (32bit and 64bit) and Windows 7®
Gigaset QuickSync for fast and easy synchronization of your PC address book with your Gigaset handset.
Thanks to this convenient software, you can easily synchronize your addresses in Microsoft® Outlook®, Windows® XP* or Windows® Mail (Vista) with your Gigaset handset via Bluetooth® or a data transfer cable.
Features:
- Download of ringertones and pictures possible
- Pictures compressed on SL78H (much better memory usage)
- Support all (not copyright protected) music formats on the PC - Midi and real Sounds (e.g. MP3, AAC, …) with automatic conversion to G.722 format during download
- Ringtone Editor: User can comfortably select, which part of the melody will be sent to handset
- Improved firmware Update handling
- Fast synchronization between your PC address book and Gigaset**
- Supports the following programs: Vista Contacts, Windows® Address book, Outlook® 2000, 2002, 2003 and Outlook® 2007
- Quickly recognizes your Gigaset handsets
- Download of ring tones***, screen savers and Picture CLIPs
- Support of Gigaset SL78H
- USB-Drivers (WHQL-certified) provided for USB-Interface
- Synchronization of up to 500 Addressbook Entries in SL78H
- Automatic check for new Firmware-Versions (daily)
- Firmware-Update of SL78H (only via USB-connection) - Support of Gigaset S79H
- USB-Drivers (WHQL-certified) provided for USB-Interface - support of multiple handsets with user friendly names
- Advanced synchronization filter dialog, more options available
- Synchronization now also with Outlook-Folders possible
New Functionality in PC-Software Gigaset QuickSync 5.1:
- Picture Editor and improved Ringtone-Editor for comfortable
- transfer of pictures and sounds
- Advanced File Upload
- Discovery wizard for serial/Bluetooth and Ethernet connection
- New CTI-Functionality (Telephony-Modus):
- Support of Windows Telephony Interface for e.g.
- dialing directly from Outlook contacts
- incoming calls are displayed on the PC
- CTI via Bluetooth for SL78H, SL400H, via USB for S79H, via Ethernet for DX600A ISDN
Firmware update for Gigaset S790, S795, S79H:
- Phone numbers which are already contained in the phone book were not stored
in the redialling list in case it was full.
- Accu picto shows now the last third on white instead of red.
- In case that display is not active, now the number key immediately will be
taken in the dial preparation; in the previous version only the display light
was switched on.
Firmware update for Gigaset SL780, SL785, SL78H:
- connect your Gigaset via USB-cable
- internet connection required
- launch Gigaset Quick Sync 5.1
- start firmware update
* .Net Framework 2.0 is necessary when using Gigaset QuickSync with Windows® XP
** Gigaset QuickSync Software is compatible with:
SL785 , SL780, SL78H, S795, S790, S79H, SL400A, SL400, SL400H, SX680isdn, SX685isdn, S685IP, S68H, DX600A ISDN
*** Only with Gigaset SL785, SL780, SL78H, S795, S790, S79H
Download
Gigaset QuickSync version 1.1.0 (Mac version)
Download version: 1.1.0 (April 2010) ; For Mac OS X 10.4.9 and higher
With this software, you can easily synchronize your contacts on your Macintosh with your Gigaset handset via Bluetooth®.
Features:
- Synchronisation of Contacts
- Download of screensavers and Picture CLIPs
- Download of ringertones*
New in version 1.1.0: - Support for USB connections
- Support for S79H, S790, S795 added
- Support for SL400H, SL400, SL400A added
- Jpeg support for smaller screen pictures, when supported by device
- Interface changes
- General bug fixes
Gigaset QuickSync Software is compatible with:
Gigaset SL785, SL780, SL78H, SL565, SL560, SL56, SL400, SL400A, SL400H, SL375, SL370, SL37H, S790, S795, S79H, S685, S680, SX685 isdn, SX680 isdn, S685 IP and S68H
*Only with Gigaset SL785, SL780 and SL78H
Download
