Gigaset S450 IP Firmware update 04/2009

02184

New features:

• E-mail viewer (with C47H, S45, S67H, S68H handsets)
• Mute function. Turn off the handset's microphone during an external call with the left display key.
• Send and receive SMS messages via VoIP*
• VoIP: If the telephone cannot establish a VoIP connection, it automatically dials via the fixed line network (auto-fallback to PSTN).
• VoIP: Call transfer via R key
• VoIP: An incoming call indicated in parallel at different VoIP devices (parallel ringing) will not be stored in the "Missed calls" list if the call was accepted at one of the devices.*
• Online directory: display the postal codes in search results.*
• Online directory: when starting a new search the cities used in the last searches will be displayed.
• Fixed line access codes can be stored in the phone.
• Some languages will be loaded on to the base via the internet, depending on the language set on the handset.
• Extended RTP port range (1024-55000)
• DHCP Option 114 implemented.*
• DHCP Option 120 implemented.*
• Web Configurator: option to specify whether the "area code" is dialled as well.
• Web Configurator: display RTP port range
• Web Configurator: new languages - Arabic and Russian
• Web Configurator: enhanced PIN protection - warning if the default pin (0000) has not been changed.

Improvements:

• The automatic search function for firmware updates is enabled even if the internet connection is temporarily interrupted during the night.
• The indication "Anonymous call activated" will no longer be displayed in the idle mode of the handset.
• The country code is synchronised between base station and handset.

* provider-dependent

How to update the firmware:

You don't need to download files. The firmware is updated directly online by the Gigaset S450 IP. You can easily initiate the update by three steps:

1. Menu » Settings » Base » Firmware Update
2. Enter base station system PIN (default setting: 0000)
3. Press the display key "Yes" to start the download

If your firmware is already up to date, the handset informs you. No action is needed then.

How to check for your firmware version:

• Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
• If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update

 readme_S450_IP_eng_V02184, txt, 10 Kb

Gigaset S450 IP Firmware update 01/2009

02140

Improvements:

• Name replacement from online directory caused an error, for very long names

How to update the firmware:

You don't need to download files. The firmware is updated directly online by the Gigaset S450 IP. You can easily initiate the update by three steps:

1. Menu » Settings » Base » Firmware Update
2. Enter base station system PIN (default setting: 0000)
3. Press the display key "Yes" to start the download

If your firmware is already up to date, the handset informs you. No action is needed then.

How to check for your firmware version:

• Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
• If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update

 readme_S450_IP_eng_V02140, txt, 8 Kb

Gigaset S450 IP Firmware update 11/2008

02139

New Features:

• Online directory for Switzerland provided by [tel.search.ch]
• HTTP Proxy support. For example online directory can be used in company environments via an HTTP proxy server.

Improvements:

• Fast media switching improved (due to partial loss of provider cost rate announcements, e.g. at Sipgate)
• Indication of VoIP waiting calls improved
• Firmware update procedure starts before VoIP connection assistant.
• Store the complete caller information in the "Missed Calls" list, if it is retrieved from online directory
• Optimised presentation of search results in Yellow Pages (on C47H, S67H, S68H handsets)
• Gigaset.net assistant starts if the user opens Gigaset.net directory for the first time and there is no corresponding Gigaset.net nickname. It does no longer start after the VoIP connection assistant.
• The phone deregisters from registrar server, once the SIP account is disabled.
• Wideband support for A58H/C38H handsets improved
• SMS wizard disabled (subscription to SMS service is no longer necessary)
• Handling of IP dialling improved
• Automatic user login by accessing the Gigaset.net configuration page via Web configurator
• Handling of multiple network mailboxes improved
• Translation errors fixed
• Support of new daylight saving time rule for New Zealand
• Sipgate echo test supported again (handling of RTP sequence numbers)

How to update the firmware:

You don't need to download files. The firmware is updated directly online by the Gigaset S450 IP. You can easily initiate the update by three steps:

1. Menu » Settings » Base » Firmware Update
2. Enter base station system PIN (default setting: 0000)
3. Press the display key "Yes" to start the download

If your firmware is already up to date, the handset informs you. No action is needed then.

How to check for your firmware version:

• Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
• If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update

 readme_S450_IP_eng_V02139, txt, 8 Kb

Gigaset S450 IP Firmware update 07/2008

02123

New Features:

• Compatibility with A58H and C38H Handsets (including Infoscreensaver as Liveticker)
• New languages: Brazilian Portuguese, Russian (country and handset dependent)
• BEL, NLD: Autoconfigurationcode-enquiry added in the Handset's connection assistant

Improvements:

• NAT Traversal improved
• STUN can be disabled for Gigaset.net
• Email-Notification: display of date and subject improved, lenght of Email address up to 74 characters
• Display IP-Address without leading "0"s during the paging call
• Entries out of the calls list will be fully copied into the telephone directory, if the name was displayed from online phonebook.
• Web configurator: does not show "********" for empty password
• SMS Status Report function improved
• SIP Protocol implementation improved
• Incorrect recall after a successful call transfer fixed
• Display Scandinavian characters
• Answering machine functionality improved

How to update the firmware:

You don't need to download files. The firmware is updated directly online by the Gigaset S450 IP. You can easily initiate the update by three steps:

1. Menu » Settings » Base » Firmware Update
2. Enter base station system PIN (default setting: 0000)
3. Press the display key "Yes" to start the download

If your firmware is already up to date, the handset informs you. No action is needed then.

How to check for your firmware version:

• Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
• If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update

Release notes:

 readme_S450_IP_eng_V02123, txt, 6 Kb

Gigaset S450 IP (version 02097) 12/2007

02097

Firmware Update 12/2007 version 02097

New Features:

• ECO-DECT is supported
• Net AM calls will be displayed at the handset
• It is possible to select international online phonebook provider
• Advanced Online phonebook features usable (Depends of Provider)
• The number of incoming calls will be replaced by the caller’s name of the online phonebook (Depends of provider)
• The SIP account can be activated with a code (Depends of provider)
• Calling Line Identity Restriction (CLIR) for VoIP (Depends of Provider)
• Directory entries for Gigaset.net and Net Directories will be transferred during registration (Handset: C45, S45, SL55, SL56, C47H, SL37H, S67H)
• Gigaset.net call forwarding
• Default Line configuration via Web Configurator
• Handset name configuration via Web Configurator
• Display of called number (like COLP in ISDN)
• With an active online connection the Web Configurator can be reached with "www.Gigaset-config.com"

Improvements:

• SIP UDP registration improved
• It is possible to edit international Prefix and Local Area Code.
• It is possible to use ", ', >, <, & in Gigaset.net Nicknames
• Unfounded Stun Requests avoided
• NTP requests minimized
• Wideband (G.722) function improved
• E-Mail and Messenger function improved
• Suffix dialing and dialing plan function improved
• Echo suppression for VoIP improved
• Online phonebook function improved
• Directory transfer to the Gigaset SL1 handset is possible
• IP dialing improved
• Notepad *.vcf files can be transmitted to the handset
• Info Screen problem with Gigaset C47H Handset fixed
• It is possible to use quotations in the "Display Name" of the SIP profile

Gigaset S450 IP User guide (short version) en GBR   (PDF, 1077 Kb)

Gigaset S675 IP, Gigaset C455 IP, Gigaset S450 IP Vxx091 en GBR USA AUS   (PDF, 306 Kb)

Gigaset C455 IP, Gigaset S450 IP Vxx081 en GBR USA AUS   (PDF, 125 Kb)