Gigaset A580 IP - Firmware update 12/2010 (version 02227)
Improvements:
- New URL for provider profile and firmware update: http://profile.gigaset.net/chagall/…
- PSTN: Bugfix for calls using access code with 2 or 3 digits
- VoIP: MWI notification for incoming calls is now VoIP account specific
- VoIP: Improved early media support for outgoing wideband calls (handling of ALERTING)
- Optimization for internal calls from a HDSP-ready handset to a standard handset
- Display correct date for the last three days of the year.
- Web Configurator (Settings/Telephony/Audio): The Codec list for
Gigaset.net is also displayed if no other VoIP accounts are configured.
- Web Configurator (Status/Device): MAC identifier for auto-configuration is shown additionally to MAC address.
- Interoperability with PBX 'Trixbox Pro' - bugfix for incoming calls
- Australia: Daylight Saving Time corrected.
How to update the firmware:
You don't need to download files. The firmware is updated directly
online by the Gigaset A580 IP. You can easily initiate the
update by three steps:
- Menu» Settings» Base» Firmware Update
- Enter base station system PIN (default setting: 0000)
- Press the display key "Yes" to start the download
If your firmware is
already up to date, the handset informs you. No action is needed then.
How to check for your firmware version:
- Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
- If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update
Download this information here:
Download
Gigaset A580 IP - Firmware update 03/2010 (version 02223)
New features:
- Web Configurator (Settings/Telephony/Advanced Settings/Call Transfer): attended and unattended call transfer implemented.
- Web Configurator (Settings/Telephony/Audio): configurable codec list for Gigaset.net telephony implemented.
- Auto-configuration using the MAC address for retail variants implemented.
Improvements: - Instability issue generated during G.722 Codec negotiation, when a SIP "183 Session Progress" Message is received, is fixed.
- Negotiation
of speech codec after ending an external consultation call between a
wideband capable (G.722 codec) and a narrowband capable phone is
improved.
- Registration of more than 5 SIP accounts is possible again.
- "MWI key is permanently flashing" issue is fixed.
- MWI notification for incoming SMS via IP.*
- Improvement for Gigaset auto-configuration using TLS encryption.*/**
- PSTN:
Local Area Code will be added to the dialled number if the usage of
Area Codes is enabled in the appropriate dialling rule.
- Switzerland: Set [tel.search.ch] as default provider for the online directory.
- Russia: Improvements for calls with Russian Caller ID.
* provider-dependent
** device-dependent
How to update the firmware:
You don't need to download files. The firmware is updated directly
online by the Gigaset A580 IP. You can easily initiate the
update by three steps:
- Menu » Settings » Base » Firmware Update
- Enter base station system PIN (default setting: 0000)
- Press the display key "Yes" to start the download
If your firmware is already up to date, the handset informs you. No action is needed then.
How to check for your firmware version:
- Via Web Configurator: Status » Firmware version » The first 5 digits indicate the number of the firmware update
- If you are in a call (> 8 sec): Menu » Service-Info » Scroll to list entry number 4. The first 5 digits indicate the number of the firmware update
Download
